Repair on Street Triple Rev Counter
Moderator: Staff
- Tvrv37
- SWB Subscriber
- Posts: 539
- Joined: Mar 16th, '18, 15:41
- First Name: Phil
- Location: Westonzoyland
Repair on Street Triple Rev Counter
Ok well the street triple lives once more after Wendy’s detour into the Dorset countryside. However the Rev counter needle has dropped past zero and now has a resting place about an inch to the right about 4000 revs out. I believe this is a stepper problem and has to be either repaired or replaced. Can anyone do this or recommend a localish rebuild service?
KTM 1290 SD GT, Tuono fighter V twin, RSV 1000 factory trackday, Yamaha RD250E,
Re: Repair on Street Triple Rev Counter
Cant you just move the needle back to where it should be on its zero mark? Will that align it all the way round.
"Welding is like cheese on toast! It gets hot and sticks together"
- Tvrv37
- SWB Subscriber
- Posts: 539
- Joined: Mar 16th, '18, 15:41
- First Name: Phil
- Location: Westonzoyland
Re: Repair on Street Triple Rev Counter
I have read it's not quite that simple, but have no real experience of electronic clocks
KTM 1290 SD GT, Tuono fighter V twin, RSV 1000 factory trackday, Yamaha RD250E,