Page 2 of 3
Posted: Feb 25th, '07, 18:41
by jon_hgv
post some pics up dude, lets have a look, ive been looking at these as most of the r6 owners on the r6 forum have these 1s..
will defo come over watters when i get it...
Posted: Feb 25th, '07, 18:45
by Mike Daytona600
I think I'm gonna have to tell the mrs to take her bike test in a couple of years
Posted: Feb 25th, '07, 20:25
by deej
racefit can for me or a carbon akrapovic if you can afford the extra
Posted: Feb 26th, '07, 18:11
by BOO749S
Pictures of Laser can. Before and after. Hope the link works
http://public.fotki.com/itexuk/r6/
Posted: Feb 26th, '07, 18:31
by jon_hgv
do they all come polished like that, what do they sound like, also is it just a straight easy swap over, going to order them 2 morow, red and white, nice choice boo.
Posted: Feb 26th, '07, 20:51
by Tom
Go Racefit, it is very rude not tooooo
Posted: Feb 26th, '07, 21:23
by jon_hgv
race fit is nice, but u can see the braket were the old pipe went as the race fit dont cover that bit, i would of else...
Posted: Feb 26th, '07, 21:38
by BOO749S
jon_hgv wrote:
do they all come polished like that, what do they sound like, also is it just a straight easy swap over, going to order them 2 morow, red and white, nice choice boo.
Hi Jon, Yes the come just like that, I find a quick wipe over with a damp cloth then a clean duster keeps them looking like new, know need for polish. Sound is hard to explain but everyone says what a great sound. You can have 3 levels of sound
1. Standard as they come which is legal but only just
2. Take the baffle out and then take of the wadding wrapped round it and put baffle back in.
Very loud / not legal you will need ear plugs
3. No baffle. I found it too loud, great for track days
They come with full instructions, just follow them and it should only take 10 to 15 mins. You do have to disconnect 2 cables connected to a butterfly on the standard exhaust. Just undo locking nuts and let cables dangle where they want to. No need to disconnect these cables from where ever they come from.
Any problems just shout
Pete
Posted: Feb 26th, '07, 21:41
by BOO749S
Jon, Sent you a pm with my mobile No if you need any help.
Posted: Feb 27th, '07, 17:17
by BOO749S
Hi Jon,
Got these crash bungs on my R6 easy to fit and no drilling of fairing.
http://cgi.ebay.co.uk/GRAVES-MOTORSPORT ... dZViewItem
Posted: Feb 28th, '07, 18:38
by jon_hgv
cheers for all the info pete, lazer pipe on order, should be here the wknd,
dont think i will be getting any sleep tonight as im on a high nowing that tomorow is the day and the weather is ment to be ok as well, also number plate came today from ebay and the tail tidy. i cant wait.
Posted: Feb 28th, '07, 18:50
by watters
pop over once you have the cans on mate,cant wait to hear it
Posted: Feb 28th, '07, 18:55
by Funky
I'm so excited too!
Posted: Mar 1st, '07, 09:27
by Little Loris
Leave it standard you fools! It's brand new and you're wanting to change it?!
Drain it dry, place it in the front room and chuck the TV out. Buy another one yourself (not forgetting to thank the missus of course) and ride that. You sounds like you can afford it!
In fact, wouldn't it be cheaper to race it and enter it into the R6 cup?
I'm jealous
Posted: Mar 1st, '07, 17:41
by Jay
So.............where are the pics Jon
