Page 1 of 1
Clearing old gasket
Posted: Jun 20th, '20, 15:06
by Kata
Hi All
What's the best method to clear old gasket off the face of something?
Ta
Re: Clearing old gasket
Posted: Jun 20th, '20, 15:34
by billinom8s
gentle and careful use of a blade, taking care not to damage the face.
of if your name is Jam, just stick the old one back together and crank it up.
Re: Clearing old gasket
Posted: Jun 20th, '20, 15:59
by Ruffian
Hahahaha no comment.
Which gasket as would use different methods dependant on what it is/how it seals.
Re: Clearing old gasket
Posted: Jun 20th, '20, 17:31
by MellowYellow
Was hammer + screwdriver for my old 60s mini.
Decoked with a scraper as well.
Re: Clearing old gasket
Posted: Jun 20th, '20, 17:57
by Tvrv37
Just did an engine casing WD40 breaks down the fibres of the old gasket and a flat screwdriver and a little patience does the rest.you can do plenty damage with a razor blade. What's it for and is it off or on the bike?
Re: Clearing old gasket
Posted: Jun 21st, '20, 07:56
by jer r1
Gaskets made in uk before 1986 still contained asbestos, many countries world wide still allow asbestos to be used so be careful when handling damaged gaskets.