South West Bikers | Motorcycle Forum

I just bought a mammoth ground anchor from the bike shop, got it home to discover the instuction guide is missing! I know its not rocket science but i'd rather do it right. Any ideas anyone? Otherwise its a trip back to the bike shop next week......

im guessing it came with the expansion bolts etc?...

TOM91 wrote:im guessing it came with the expansion bolts etc?...

Yes it got bolts and ball bearings in the pack. You got one?

Get a decent sds drill or similar, Put the ground anchor where you want to put, mark the holes. Use a drill bit slightly larger than the rawl bolts and drill the holes. Then bolt it down

delvey91 wrote:Get a decent sds drill or similar, Put the ground anchor where you want to put, mark the holes. Use a drill bit slightly larger than the rawl bolts and drill the holes. Then bolt it down

Cheers Delvey, i'll have a go next week.....

delvey91 wrote:Get a decent sds drill or similar, Put the ground anchor where you want to put, mark the holes. Use a drill bit slightly larger than the rawl bolts and drill the holes. Then bolt it down

and then smack the ball bearings into the bolt heads

GSXRSi will have had to pull a favour in to fit this one. He is useless at anything DIY. Out of interest, anyone seen his ground anchor in position? LOL He'll probably ask me to do it in the Summer.