South West Bikers | Motorcycle Forum

I am having a few problems wiring up the VFR4 NC24 coils (I have attached a pic below to help with explaining).

I have the obvious 4 coils and 8 wires as per the diagrame, now natural thinking tells me to put all the black/white stripes to the black terminals on the coils and the remainder on either the green or blue, but when i do this, all I get is a buzzing from the started solinoid.

I thought the solinoid was busted so put on another one but the same thing happens.

Can anyone suggest what I am doing wrong.

P L E A S E

dont know if this helps or not

ooops thats a bit on the large size sorry

I can only see 2 coils on that diagram andy ??

I have 4 single coils, ie, one coil per cylinder or am I just being thick

Honda VFR 400 RH2/RJ (NC24) (import) 87-88
Ignition Coil
Electrical Section

This picture shows a Ignition Coil for a 87-88 Honda VFR400 RH2/RJ (NC24) (import). Many other Honda spare parts listed.
£56.28 plus postage.

null

Open New Honda VFR 400 RH2/RJ (NC24) (import) 87-88 Shop Page
wemoto © Worlds End Motorcycles 2001-2009

No Andy, nothing like it.

I have the RH not RH2

I have 4 coils or which only one lead and cap comes from each one, hense 4 coils and 8 wires to be attached.

taken a few photos and will load them up in about 5 mins

Here are the 2 front and 2 back coils

This may sound silly..but maybe a flat battery ? I always used to get a buzzing sound from the solenoid when the battery was flat!

lee at arlington said that aswell today {the battery} or a bad earth

I was using a battery charger as I had no battery and it was set for 12V fast charge, but I have since found out that the amperage was not high enough to kick the bike over. Have now found a battery and charged her up and she kicks over luuuuuuurvly

Next thing to do is throw some juice into her and try to fire her up, will be noisey though as I havent got the gaskets for the downers