Any help please

rastas · Post by **rastas** » Jun 16th, '07, 11:15

hi guys any ideas on this one please. it is for my bro in law.

i have a yz426f 02 and i striped it to powder coat the frame(having the bike mot before i did it)and now that i put it all back together i have lost my spark!!!???i have use my mulitmeter along with the manuel and every thing seams to be with in what its suposed to be .now im stuck for a reason can anyone please shed some light!!????

cheers

Nige

Mervin · Post by **Mervin** » Jun 16th, '07, 12:50

Powder coating nice thick coat of plastic all over the frame, you need to scrape off some to get a good earth again where things earth to the frame
Mervin

baskie · Post by **baskie** » Jun 16th, '07, 19:11

Mervin wrote:Powder coating nice thick coat of plastic all over the frame, you need to scrape off some to get a good earth again where things earth to the frame
Mervin

bingo, check fuses. ht coil? got a spark comming out of the spark plug? but yeh deffo need a good earth.

nice choice of bike btw ;)

rastas · Post by **rastas** » Jun 16th, '07, 19:51

yep done the earth point. no spark from the ht lead when kicking it over. there are no fuses. no lights or any thing fitted.
cheers

tony · Post by **tony** » Jun 16th, '07, 22:12

can the engine actually earth?, go around and check continuity between battery negative terminal and engine, mounts etc

Ive seen people desperately trying to sort out ignition problems on rubber mounted engines DOH they forgot to fit the earth strap!!!

but if it all worked before then check earths and also check the kill switch, if it earths through the bars, check the bars are earthed