Overheating Bike

Any General info on Mechanics based on 'all' bikes...

Moderator: Staff

charlie
Learner Driver
Posts: 4
Joined: Apr 6th, '08, 10:48
Location: Devon

Overheating Bike

Post by charlie »

My Honda CB-1 400 1989, is constantly overheating :( . Its worst in slow moving traffic where i'm stopping and starting, i've cheacked water and oil levels and there fine. what else could be causing this problem and any sloutions??
chris_1127
Learner Driver
Posts: 1558
Joined: Jul 2nd, '04, 14:20
Location: Paignton Rides: Yamaha xtz750, XS650 chop in (very slow) progress

Re: Overheating Bike

Post by chris_1127 »

If the oil and water levels are ok and not contaminated (oil in water or vice versa) then check that the stat is opening as it should, and that the rad isn't clogged. Have the exhaust or fuelling been messed with, or the filter all clogged? if it's lean it will overheat.
Does your fan kick in as it should?
gsx-aaaaaaaargh!!!
Jonny
Learner Driver
Posts: 616
Joined: May 4th, '06, 11:25
First Name: Jonny
Location: Bristol

Re: Overheating Bike

Post by Jonny »

Well I took a look at it tonight. There wasn't nearly enough water in it. Plus it was running verry lean.

I don't believe the fan is working though. I shal get the test meter out on the weekend. Any tips on testing to see if it works or not?
User avatar
Blimey
Learner Driver
Posts: 3299
Joined: Feb 13th, '05, 14:56
Location: Exeter

Re: Overheating Bike

Post by Blimey »

Jonny wrote:Well I took a look at it tonight. There wasn't nearly enough water in it. Plus it was running verry lean.

I don't believe the fan is working though. I shal get the test meter out on the weekend. Any tips on testing to see if it works or not?
Pull the feed off "in" and "out" the temp sensor that runs to the fan and bridge them together. That will confuse the fan that the temp has reached the required temperture to need the fan to start.

If fan does not run then its eitheir fan or fuse or break between that is at fault.

Oh and have ignition on whilst testing this
MARK xx
Jonny
Learner Driver
Posts: 616
Joined: May 4th, '06, 11:25
First Name: Jonny
Location: Bristol

Re: Overheating Bike

Post by Jonny »

Good idea thanks. I'll give that a go on the weekend.
User avatar
-J-
Learner Driver
Posts: 41
Joined: Jun 4th, '08, 10:07
Location: Dorchester, Dorset Rides: GSXR 600 SRAD

Re: Overheating Bike

Post by -J- »

If alls well with that i would recommend wiring a switch so you can manually turn it on during traffic
User avatar
TLS-Moose
Site Admin
Posts: 7148
Joined: Dec 14th, '05, 22:59
Location: The fringes of NA, sadly not the UK equivalent of LA!!

Re: Overheating Bike

Post by TLS-Moose »

1. First do what Blimey has suggested.
2.If it doesn't actuate the fan, follow the wires back from the fan to the first connector block. Take a direct feed from the battery (or other suitable 12v power source) and connect to the fan wires and see if the fan go's then.

If 1. doesn't work but 2. does, the temperature sensor isn't working. If 2. doesn't work, the fan is dead :D
Of all the things I have ever lost, I miss my mind the most .....

Handle stressful situations like a dog - If you can't eat it or play with it, pee on it and walk away
Post Reply