South West Bikers | Motorcycle Forum

For those that might have missed it: From January 2021, those attending MSV trackdays - bikes must be fitted with a front brake lever guard.

Here's the info' and the relevant section, taken from their 'Bike Trackday Requirements':
Vehicle Requirements
The vehicle you intend to use must be in good condition both mechanically and bodily and suitable for its intended use on the track. It is your duty to ensure that the vehicle remains in this condition for the duration of the activity, in the interests of your safety and the safety of others at the circuit. All vehicles must also comply with our noise regulations. Touring bikes must remove all luggage boxes and trikes are not permitted. From Jan 2021 all bikes must be fitted with front brake lever guards. . . . . . . https://www.msvtrackdays.com/bike/terms-and-conditions/

IMHO this is overkill .

Had seen this, not sure why it's happening though.

I mean you can pick one up for a couple of quid as pm many people make them using 3d printers nowadays.

Why overkill? Makes perfect sense to me

There was a fatality last year that probably would have been prevented had the rider had a guard fitted

So are you suggesting they become compulsory on the road too? Should abs also be compulsory, after all plenty have died following front wheel lockup and off?
Sorry i don't agree, obviously will have to comply, else i won't be able to do any msv tracks but i really don't agree.
What about having 4 outrigger wheels fitted?
Will having brake guards make some riders less careful about overtakes?

No
No
Don't do any then your choice
Give me strength
No but it'll be safer

Are anti-lever guarders the latest incarnation of the anti-masker eejits?

Interesting how having to fit a small blade of plastic inflames their libertarian righteousness and inspires them to write to the Daily Mail...

i've them on mine for a couple of years, no big deal.

i think it may stop a lot of people with road bikes from having a toe dipper though

MikeZ wrote: ↑Nov 25th, '20, 13:21 Should abs also be compulsory, after all plenty have died following front wheel lockup and off?

It kind of already is for road use, but thankfully just for new bikes as retrofitting abs would be very costly.

From Google
"On January 1st, 2016, it became mandatory for all motorcycles that have an engine displacement greater than 125cc to have an ABS system fitted. In addition, smaller motorised two-wheelers with a displacement of 50cc or more are now required to have either ABS or a combined brake system fitted."

Glad this got everybody talking.
My comments were intended to be somewhat inflammatory.
I would like the choice, i certainly will not miss out on a trackday just because of brake guard requirement, they're a good idea but i (currently) only have hand guards fitted on 2 of my 3 bikes, unfortunately the 1 i use for trackdays does not.

Not sure I see the point on a road bike - if you're that close you're at risk of a third party applying the front brake, your kinda in the last chance saloon (possibly literally ) anyway ....

I've handing guards on the superduke. There's also a few supermotos that come with them.

Just get cheap ones from China, they are cheap and cheerful and do the same job as the expensive ones

Plus they make the bike look like it's ridden by an ace racerist

get two then, even more of one.


just not like trump is a racerist